Is there a redis client for stackexchange.redis?

StackExchange.Redis is a pretty good .NET client for Redis. Unfortunately, it can be a little bit tricky to use, and the existing documentation is far from comprehensive. After installing StackExchange.Redis via NuGet, a Redis connection can be obtained via a special ConnectionMultiplexer object.
One may also ask, what is StackExchange Redis used for?
Overview StackExchange.Redis is a high performance general purpose redis client for.NET languages (C#, etc.). It is the logical successor to BookSleeve, and is the client developed-by (and used-by) Stack Exchange for busy sites like Stack Overflow. For the full reasons why this library was created (i.e.
Keeping this in consideration, what is the difference between Redis-sharp and hiredis? Redis Client is based on redis-sharp for the basic communication functions, but it offers some differences. An async redis client designed for simplicity and reliability. A redis client based on hiredis, supports cluster/pipeline and is thread safe and includes two files only. The transaction is on the way:)
In addition, how do I install more Redis clients?
More .NET Redis clients can be found in the C# section of the Redis Clients page. There are several ways to install this package including: The following code creates a connection to Redis using StackExchange.Redis in the context of a console application:
Besides, how does Azure cache for Redis work with different clients?
Each client has its own API that makes calls to the Azure Cache for Redis instance using Redis commands. Because each client is different, you can't find one centralized class reference on MSDN.

20 Similar Question Found

Why do we need stackexchange to use redis?

StackExchange.Redis also provides a way to send batch request to Redis. What it allows us to do is to send a block of operations to the server together. The reason for this is that it will help reduce packet fragmentation when the connection to redis is slow.

How to forget watched keys in stackexchange redis?

So what you can do is: WATCH a key, check data from that key in the normal way, then MULTI / EXEC your changes. If, when you check the data, you discover that you don't actually need the transaction, you can use UNWATCH to forget all the watched keys. Note that watched keys are also reset during EXEC and DISCARD.

What is the use of redis in stackexchange?

Another common use of redis is as a pub/sub message distribution tool; this is also simple, and in the event of connection failure, the ConnectionMultiplexer will handle all the details of re-subscribing to the requested channels. Again, the object returned from GetSubscriber is a cheap pass-thru object that does not need to be stored.

Why is stackexchange.redis used by stack overflow?

StackExchange.Redis Release Notes Overview StackExchange.Redis is a high performance general purpose redis client for .NET languages (C#, etc.). It is the logical successor to BookSleeve, and is the client developed-by (and used-by) Stack Exchangefor busy sites like Stack Overflow. For the full reasons why this library was created (i.e.

How to create a new set in stackexchange?

If key does not exist, a new set is created before adding the specified members. long GeoAdd ( RedisKey key, GeoEntry [] values, CommandFlags flags = CommandFlags. None ); /// Removes the specified member from the geo sorted set stored at key. Non existing members are ignored.

What's the difference between mathoverflow and stackexchange?

The two sites are meant for very different audiences, and have very different types of questions. MathOverflow's primary goal is for users to ask and answer research level math questions, the sorts of questions you come across when you're writing or reading articles or graduate level books. From the Area51 page for math.stackexchange:

How to tell stackexchange.redis client to connect to cluster?

How do I tell StackExchange.Redis (v1.0.481) that it's about to connect to a Redis cluster (v3.2.6, in case it matters), and not just a standalone/replicated instance? When I use the redis-cli for example, I have to pass a -c flag to make it cluster-aware.

Which is the simplest configuration example in stackexchange.redis?

Because there are lots of different ways to configure redis, StackExchange.Redis offers a rich configuration model, which is invoked when calling Connect (or ConnectAsync ): The configuration here can be either: The latter is basically a tokenized form of the former. The simplest configuration example is just the host name:

How does stackexchange.redis resolve master nodes?

Normally StackExchange.Redis will resolve master/slave nodes automatically. However, if you are not using a management tool such as redis-sentinel or redis cluster, there is a chance that occasionally you will get multiple master nodes (for example, while resetting a node for maintenance it may reappear on the network as a master).

How to use stackexchange.redis in.net?

Now, when it comes to using in .NET application, there are many packages that provide you with redis communication, but since on MSDN webiste Microsoft is using StackExchange.Redis package, so I will use the same package for example how to take benefit of previously mentioned redis set command overload.

Which is the central object in stackexchange.redis?

The central object in StackExchange.Redis is the ConnectionMultiplexer class in the StackExchange.Redis namespace; this is the object that hides away the details of multiple servers. Because the ConnectionMultiplexer does a lot, it is designed to be shared and reused between callers.

What is stackexchange.redis.extensions.core 5.5.0?

Extensions. Core 5.5.0 StackExchange.Redis.Extensions is a library that extends StackExchange.Redis allowing you a set of functionality needed by common applications. To store complex data It requires one of the following implementations: - StackExchange.Redis.Extensions.Newtonsoft - StackExchange.Redis.Extensions.Jil

How to bind stackexchange.redis in asp.net core?

If you use Azure, add in the App setting name in Application Settings for your ASP MVC .NET Core App Service to bind at run-time on the Azure side after deployment. The connection string for production shouldn't occur in your code from the security reasons. Add the binding for e.g. development appsettings.Development.json

Is the lifetime of a stackexchange subscription global?

Note that all subscriptions are global: they are not scoped to the lifetime of the ISubscriber instance.

How to remove all from stackexchange.redis cache?

To remove all involves the FLUSHDB or FLUSHALL redis command; both are available in StackExchange.Redis; but, for reasons discussed here, they are not on the IDatabase API (because: they affect servers, not logical databases). As per the "So how do I use them?"

What kind of stackexchange does redis use?

StackExchange.Redis is a raw client - it talks in Redis terms only. It does not attempt to be an ORM of any kind. It will, however, store any string or byte [] that you care to throw at it - which means you should have your choice of serializers.

How to save data to redis store using stackexchange?

The 'IRedisCacheClient' provides method like 'AddAsync' and 'GetAsync'. The 'AddAsync' method for saving data to Redis store, this can store a simple string type or a complex object type (serialized objects implicitly before saving) and it also provides an option to specify an expiration time for the record in Redis store.

Which is the simplest operation in stackexchange.redis?

The simplest operation would be to store and retrieve a value: Note that the String... prefix here denotes the String redis type, and is largely separate to the .NET String type, although both can store text data. However, redis allows raw binary data for both keys and values - the usage is identical:

How to use stackexchange.redis in an asp.net core project?

It has a boilerplate service that automatically serialises POCO classes into a redis hashset. in your ASP MVC .NET Core project. If you use Azure, add in the App setting name in Application Settings for your ASP MVC .NET Core App Service to bind at run-time on the Azure side after deployment.

How is stackexchange.redis spoofed on idatabase?

Actually, StackExchange.Redis spoofs the RANDOMKEY one on the IDatabase API by simply selecting a target server at random, but this is not possible for the others. So how do I use them? Simple: start from a server, not a database.