Don't remove rust, convert rust. Corroseal rust converter is an elite, industrial strength product for all your marine, household, automotive, and industrial rust problems. Extend the life of your metal equipment by protecting it from rust and corrosion.
Just so, Rust converters are chemical solutions or primers that can be applied directly to an iron or iron alloy surface to convert iron oxides ( rust) into a protective chemical barrier . And, The converter however is not UV stable, and is not meant to be a top coat, it's more like a paintable primer. You can use nearly any primer or paint over the top of rust after applying the Rust Converter. The best thing to apply though, to really guard against rust coming back, is the Eastwood Rust Encapsulator. Keeping this in consideration, What are rust converters? A rust converter is a liquid used to remove the rust that has accumulated on various objects. The liquid is applied to the sulfurase of a rusted object, which then converts rust from iron oxide to ferric phosphate. Additionally, Don't remove rust, convert it! Corroseal Rust Converter is an effective, water based, non-hazardous, non-toxic, non-flammable, rust corrosion control coating for rusted and painted steel surfaces. It is available through Cloverdale Paint, Rodda Paint and dealers worldwide.
19 Similar Question Found
How long does it take for corroseal rust converter to dry?
Check in 15 minutes, if brown or gray spots peak through, apply another thick coat. A second coat is encouraged to get all rust covered with no seepage. Check again in 15 minutes and reapply as needed. STEP 4: Once dry, it is primed and ready for paint.
What do you need to know about corroseal rust converter?
Corroseal rust converter is an elite, industrial strength product for all your marine, household, automotive, and industrial rust problems. Extend the life of your metal equipment by protecting it from rust and corrosion. Rust occurs naturally when the iron in steel oxidizes and returns to its original state, iron oxide.
How does corroseal rust converter work for metal primer?
Through an innovative chemical conversion process, Corroseal Rust Converter converts rust (iron oxide) into a stable substance, magnetite. It also primes the surface with a high quality latex metal primer at the same time. Corroseal truly provides one step corrosion control. ECO-FRIENDLY ALTERNATIVE TO SANDBLASTING
What makes corroseal a good rust converter?
Corroseal® is a rust converting product based in gallic acid. This converter is composed of gallic acid, ethylene glycol and acetate. It is relatively acidic, both generally and in comparison to other tested converters, with a pH of 1.50. Corroseal® is creamy white and has a thick consistency
How does corroseal rust converter convert iron oxide to magnetite?
Through an innovative chemical conversion process, Corroseal Rust Converter converts rust (iron oxide) into a stable substance, magnetite. It also primes the surface with a high quality latex metal primer at the same time.
Where can i buy corroseal rust converter metal?
Sold by BGGS and ships from Amazon Fulfillment. FREE Shipping on orders over $25.00. Details Follow these four easy steps and breathe new life into your work. STEP 1: To start, remove large pieces of rust scale so Corroseal has a surface of fine rust to convert. This will avoid chipping later. STEP 2: Scrub clean removing oil and dirt.
How long does it take for corroseal rust converter to work?
The thicker, the better. It will be white when first applied, then begin to turn black as it converts rust. Check in 15 minutes, if brown or gray spots peak through, apply another thick coat. A second coat is encouraged to get all rust covered with no seepage.
How does a corroseal rust converter work on a car?
The Corroseal rust converter help extend the lifespan of all your metal equipment by keeping both corrosion and rust at bay. This formula works by converting the existing rust to an inert state where it can no longer spread. It doubles as a surface primer that can be painted upon depending on your needs and desires.
Why is corroseal the best way to treat rust?
It also primes the surface with a high quality latex metal primer at the same time. Corroseal truly provides one step corrosion control. Corroseal is the best way to deal with rust because it is less expensive, less time consuming, and is much more environmentally friendly than sandblasting.
What's the best way to apply corroseal for rust?
We highly recommend Corroseal Cleaner for metal surface prep. Rinse thoroughly after cleaning. Then rinse again just to be sure. STEP 3: Using a brush, roller or spray, apply a thick coat of Corroseal. The thicker, the better. It will be white when first applied, then begin to turn black as it converts rust.
How does corroseal convert rust to magnetite?
Through an innovative chemical conversion process, Corroseal Rust Converter converts rust into a stable substance, magnetite. It also primes the surface with a high quality latex metal primer at the same time. Corroseal truly provides one step corrosion control.
What does a rust converter convert rust into?
Rust converters are chemical solutions or primers that can be applied directly to an iron or iron alloy surface to convert iron oxides ( rust) into a protective chemical barrier .
How does eastwood rust converter work to remove rust?
This high-tech formula halts residual rust in its tracks and converts it into a black protective polymeric coating that eliminates the need for sanding. The converted protective coating is a suitable primer, and is compatible with most top coats. Simply remove loose rust with a wire brush, then apply Eastwood’s Rust Converter.
Which is better rust converter or rust encapsulator?
Eastwood Rust Converter is typically applied to the rust you just can’t remove. It works best with rust that is worse than just a surface discoloration. Rust Converter needs the rust to work; it’s like a 2 part system with the rust acting as the activator.
How does eastwood's rust converter work on rust?
Eastwood's Rust Converter is a unique acidic paint that actually converts rust into an inert iron oxide. You can watch it work: from its original color, it will gradually turn blue/black as it stabilizes rust. The perfect first step in sealing your rusty metal surfaces. How do I ensure my project is fully protected from rust?
Can you use rust converter over paint over rust?
You can use nearly any primer or paint over the top of rust after applying the Rust Converter. The best thing to apply though, to really guard against rust coming back, is the Eastwood Rust Encapsulator. Rust Encapsulator can be applied over lightly rusted metal, or even clean bare metal, and seals it from moisture and corrosion.
Can a rust converter be used to remove rust?
When it comes to removing rust from a car, many people think of a wired brush attachment and a rust prevention paint. However, by using a rust converter, you are able to penetrate rust, which causes a reaction that create a new polymer compound.
How to remove rust from canadian tire rust converter?
Apply Rust Converter liberally to the metal surface with a brush or applicator and work into any pitted areas. Allow 10 to 30 minutes for the rust to dissolve and then thoroughly wash off with water. Wipe the surface dry. If necessary, repeat the application on heavily rusted areas or allow remover to remain on surface longer (up to 60 minutes).
Can a rust converter be used on a rust panel?
Rust converters contain a latex co-polymer. The rust converters are not penetrative. Try this test: Get a rusty panel and coat it with the rust converter. The converter will generally turn the rusty area an impressive blue/black colour (depending on which brand you use, some don't even work).
This website uses cookies or similar technologies, to enhance your browsing experience and provide personalized recommendations. By continuing to use our website, you agree to our Privacy Policy