Coding With Fun
Home Docker Django Node.js Articles Python pip guide FAQ Policy

How to register the active911 webview device code?


Asked by Kase Holmes on Dec 14, 2021 FAQ



Active911 Webview Go Please enter your device code to register this device CONNECTING... CONNECTED TO SERVER You have reloaded Webview more than 20 times in the last 48 hours. Webview was designed for always-on operation. If you are refreshing your screen to update the display,
Besides,
Go to the Devices tab in your Active911 account, and create a new device. Set the "Page type" to "Webview" Go to the PC that will be running Webview. Check with your IT staff to make sure that the computer won't be powered off each day. Make sure that your firewall is not blocking port 80, 443, or 5280.
Likewise, Go to the Devices tab in your Active911 account, and create a new device. Set the "Page type" to "Webview" After saving, write down the Device Code from the right hand column Go to the PC that will be running Webview.
Additionally,
The main website is located at http://www.active911.com . ¿Hablas español? Clic aquí para la Wiki en español: https://blog.active911.com/es/knowledgebase/ This section is intended to help with the initial creation and setup of an agency's account.
Subsequently,
After the telnet client is installed, click the Start menu, type 'cmd' and hit enter. This will start the command prompt. In the cmd prompt, type telnet webview.active911.com 80 and hit enter. This should open up a blank telnet screen. This means this port has connected successfully. Repeat steps 6 & 7 for port 443 and 5280.